04-05 GSX-R 600/750, 05-06, 07-08 GSXR1000 FRAME SLIDER
INSTALLATION INSTRUCTIONS
WARNING: The installation of all parts in these installation instructions must be performed by a qualified motorcycle mechanic who is using the correct tools and who understands the correct use of all tools required to complete the installation.
NOTE: These sliders attach directly to the engine mounts of the bike and require no modifications or cutting of the
fairings.
The right side of the bike is the side with the throttle, and the left side of the bike is the side with the clutch lever.
1. Locate the forward engine mounts in the frame of the bike; they are visible through the vent holes on both sides
of the bike.
2. Install one slider at a time- do not loosen both engine mounts at the same time.
3. Loosen (counter-clockwise rotation when viewed from the side of the bike) the factory engine mount bolt and
remove it from the engine mount; do not loosen the pinch bolt on the frame.
4. For the right side, select the shortest of the two sliders and verify it has the correct bolt in place.
*The 04-05 GSXR 600/750 uses the 80mm bolt on the right side
*The 05-06 GSXR 1000 uses the 90mm bolt on the right side
*The 07-08 GSXR 1000 uses the 90mm bolt on the right side
WARNING: THE WASHER MUST BE ON THE SCREW BEFORE INSTALLING THE SLIDERS
5. Place the slider over the mounting point and insert the bolt through the slider and the engine mount, then turn the bolt clockwise. You
should feel the threads of the bolt engage the threads of the engine mount. There should be little resistance until the bolt head contacts the aluminum spacer inside the slider.
6. Torque the screw to the factory torque specification (same as factory screw).
7. For the left side, use the longest of the two sliders and verify the correct bolt is in place
*The 04-05 GSXR 600/750 uses the 100mm bolt on the left side
*The 05-06 GSXR 1000 uses the 100mm bolt on the left side
*The 07-08 GSXR 1000 uses the 90mm bolt on the left side
Repeat steps 3,5, and 6 to install the left side
If you damage one slider in a crash or drop, you can order just the side you need on our website.
For technical assistance, please contact us
INSTALLATION INSTRUCTIONS
WARNING: The installation of all parts in these installation instructions must be performed by a qualified motorcycle mechanic who is using the correct tools and who understands the correct use of all tools required to complete the installation.
NOTE: These sliders attach directly to the engine mounts of the bike and require no modifications or cutting of the
fairings.
The right side of the bike is the side with the throttle, and the left side of the bike is the side with the clutch lever.
1. Locate the forward engine mounts in the frame of the bike; they are visible through the vent holes on both sides
of the bike.
2. Install one slider at a time- do not loosen both engine mounts at the same time.
3. Loosen (counter-clockwise rotation when viewed from the side of the bike) the factory engine mount bolt and
remove it from the engine mount; do not loosen the pinch bolt on the frame.
4. For the right side, select the shortest of the two sliders and verify it has the correct bolt in place.
*The 04-05 GSXR 600/750 uses the 80mm bolt on the right side
*The 05-06 GSXR 1000 uses the 90mm bolt on the right side
*The 07-08 GSXR 1000 uses the 90mm bolt on the right side
WARNING: THE WASHER MUST BE ON THE SCREW BEFORE INSTALLING THE SLIDERS
5. Place the slider over the mounting point and insert the bolt through the slider and the engine mount, then turn the bolt clockwise. You
should feel the threads of the bolt engage the threads of the engine mount. There should be little resistance until the bolt head contacts the aluminum spacer inside the slider.
6. Torque the screw to the factory torque specification (same as factory screw).
7. For the left side, use the longest of the two sliders and verify the correct bolt is in place
*The 04-05 GSXR 600/750 uses the 100mm bolt on the left side
*The 05-06 GSXR 1000 uses the 100mm bolt on the left side
*The 07-08 GSXR 1000 uses the 90mm bolt on the left side
Repeat steps 3,5, and 6 to install the left side
If you damage one slider in a crash or drop, you can order just the side you need on our website.
For technical assistance, please contact us
