Yamaha FJR1300 Frame Slider Installation Instructions
1. Start on the left side of the bike (do not loosen both sides at once) by removing the engine mount
screw(10mm hex/Allen screw) circled in the illustration(B).
2. The long slider goes on the left side. Lightly lubricate the supplied screw and install the frame slider.
3. If using a torque wrench, tighten screw to 35 lb/ft.
4. Make sure the left side is tight before starting on the right side.
5. For the right side, use the same procedure- remove the engine mount screw circled in the illustration (A) and
install the short frame slider in this position.
You can maintain the factory shine of your OES frame sliders by using a wax or polish on them when cleaning the
bike. The sliders finish can be discolored/oxidized due to UV exposure. This may occur more quickly if waxing or
polishing is not done at least two times per year.
If one slider is damaged in a crash or drop, please visit our website or contact us to order just the side you need.
For technical assistance, please contact us
1. Start on the left side of the bike (do not loosen both sides at once) by removing the engine mount
screw(10mm hex/Allen screw) circled in the illustration(B).
2. The long slider goes on the left side. Lightly lubricate the supplied screw and install the frame slider.
3. If using a torque wrench, tighten screw to 35 lb/ft.
4. Make sure the left side is tight before starting on the right side.
5. For the right side, use the same procedure- remove the engine mount screw circled in the illustration (A) and
install the short frame slider in this position.
You can maintain the factory shine of your OES frame sliders by using a wax or polish on them when cleaning the
bike. The sliders finish can be discolored/oxidized due to UV exposure. This may occur more quickly if waxing or
polishing is not done at least two times per year.
If one slider is damaged in a crash or drop, please visit our website or contact us to order just the side you need.
For technical assistance, please contact us
