This set of frame sliders fits the 2010-2012 Kawasaki
Z-1000. The sliders have high impact strength and use
6061 aluminum spacers that are pressed into the slider.
No modifications are required to install. The set includes
12.9 grade, high strength mounting bolts. These sliders
are the highest quality on the market. For the best, go
with OES!
Please make a selection in the following fields before
ordering.
Z-1000. The sliders have high impact strength and use
6061 aluminum spacers that are pressed into the slider.
No modifications are required to install. The set includes
12.9 grade, high strength mounting bolts. These sliders
are the highest quality on the market. For the best, go
with OES!
Please make a selection in the following fields before
ordering.
Check out these high quality
swingarm spool sliders for the
2010-2012 Kawasaki Z-1000.
Made of Delrin with 6061
aluminum bases and available
in black or white. Our spools
have deep grooves for positive
engagement with your
swingarm stand. 12.9 grade,
high strength mounting
hardware is included.
swingarm spool sliders for the
2010-2012 Kawasaki Z-1000.
Made of Delrin with 6061
aluminum bases and available
in black or white. Our spools
have deep grooves for positive
engagement with your
swingarm stand. 12.9 grade,
high strength mounting
hardware is included.
This is a set of the same frame
sliders and swingarm spools as
listed above, but in one easily
purchased, discounted set.
sliders and swingarm spools as
listed above, but in one easily
purchased, discounted set.
Our fork sliders for the 2010-2012 Kawasaki Z-1000
will help protect the forks in the event of a crash.
The sliders are made of Delrin for high impact
strength. Supplied with stainless steel mounting
screws. Attached by inserting the supplied 6061
aluminum rod into the hollow axle and tightening
mounting screws. Installation is very simple and
takes only a few minutes.
will help protect the forks in the event of a crash.
The sliders are made of Delrin for high impact
strength. Supplied with stainless steel mounting
screws. Attached by inserting the supplied 6061
aluminum rod into the hollow axle and tightening
mounting screws. Installation is very simple and
takes only a few minutes.
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
We also offer a combo set of the frame
sliders, swingarm spools, and fork
sliders as listed above in a discounted
set. Order here and save!
sliders, swingarm spools, and fork
sliders as listed above in a discounted
set. Order here and save!
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
If you've crashed or dropped your
2010-2012 Kawasaki Z-1000 and
damaged one of your frame sliders, you
can buy just the side you need here.
The slider comes with a new mounting
screw. Please make the proper
selections in the following fields. Side is
as viewed from sitting on the bike, so
right is throttle side and left is clutch
lever side.
Crash testimonials are always
welcome- we'll put them with the rest
on our "OES Difference" page!
2010-2012 Kawasaki Z-1000 and
damaged one of your frame sliders, you
can buy just the side you need here.
The slider comes with a new mounting
screw. Please make the proper
selections in the following fields. Side is
as viewed from sitting on the bike, so
right is throttle side and left is clutch
lever side.
Crash testimonials are always
welcome- we'll put them with the rest
on our "OES Difference" page!
Replacement Frame Slider