Our Delrin swingarm spools
for the 2008-2012 R6
feature deep grooves for
positive engagement with
your rear stand and extra
material on the ends to work
as sliders to help protect
your swingarm in a crash.
Stainless steel screws are
included with the set.
Color
$19.99
Click for large image
____________________________________________________________________________________________________________________________
Our Delrin bar
ends are
slightly longer  
and absorb
impact better
than the steel
bar ends
which are  
originally on
the bike.
Color
$15.00
Replacement Frame Sliders
These items are worth their weight in gold! If it takes
you several minutes of fumbling around before the
rear wheel is installed on your 06-12 R6-R, these
tools will put an end to all your troubles!

The smaller part in the left side of the picture presses
into the hollow, threaded end of the rear axle to act as
a guide for the axle as it is being inserted through the
swingarm and wheel. We've been using this item for
years on our race bikes to make wheel installation a
snap.

The larger part on the right holds the rear brake
caliper in place while the wheel and axle are being
installed. Simply install the rear brake caliper, insert
the installation tool into the swingarm and through  
the caliper, install the wheel and chain, then insert the
axle. The pointed end of the axle will easily find its
mark and push the installation tool out of place. Put
the axle washer and nut on and you've just completed
a wheel installation easier than ever before!
$24.99
06-12 R6-R Rear Wheel Installation Kit
Instructions
Left side slider and
bracket assembly
for 08-12 R6.
Includes mounting
hardware.
?
Shape
Color
?
Logo
$30.00
If you damage a frame slider in a crash or by
dropping the bike, you can replace just the
set. Please make a selection in the following
fields. Side is as viewed by sitting on the If
you damage a frame slider in a crash or by
bike, so left is clutch lever side, and right is
throttle side. throttle side. The left side for
the 08-12 R6 uses an offset bracket- the
$19.00 slider is without the bracket, since
the bracket does not always get damaged.
The left side slider and bracket combo is
available below for $29.00
?
Shape
Side
Color
?
Logo
$20.00
If you need frame sliders,
swingarm spools, and bar
ends for your 2008-2012
Yamaha R6, we have this
high quality set at a great
price!
?
Shape
Color
?
Logos
$74.99
WOW! What a bargain! If you need
swingarm spools with your frame sliders,
take advantage of our great price for this
combo set. This set of 2008-2012 Yamaha
R6 no-cut frame sliders and swingarm
spools has unmatched, super-high quality
and an unheard of, super-low price. No
other manufacturer has an offer to compare!
?
Shape
Color
?
Logos
$63.95
This high quality set of OES frame sliders fits the
2008-2012 Yamaha R6. The frame sliders have high
impact strength and use pressed-in 6061 aluminum
inserts. The left side uses a 6061 aluminum offset
bracket, so there are NO FAIRING
MODIFICATIONS REQUIRED to install. Plus, the
bracket is black anodized for a great look. The right
side attaches directly to the engine mount point on
the frame. 12.9 grade, high strength mounting
hardware is included with the set.                            

More info on OES Frame Sliders
Installation Instructions
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
Home
Color
?
Shape
?
Logos
$49.99